China Plate Condenser Manufacturer, Supplier, Factory

China factory bulk supply SANHENG SHR Thermal Expansion Valves For Refrigeration Unit. It’s a device used to control the temperature and pressure of a refrigeration system. It maintains the pressure balance within the system by regulating the flow of refrigerant to achieve temperature control.

SANHENG quality SKVP Evaporator Pressure Regulator in stock. The SKVP evaporator pressure regulator is installed on the suction line at the back of the evaporator and is used for:
1. Maintain a constant evaporation pressure to ensure a constant evaporator surface temperature. The control of the regulator is adjustable by throttling in the suction line so that the flow of refrigerant matches the load of the evaporator.
2. Prevent the evaporation pressure from being too low (for example, prevent the evaporator from freezing in the chiller). The regulator closes when the evaporator pressure is below the set value.
3. The SKVP regulator can also be used in refrigeration systems with two or more evaporators with different evaporation pressures for one compressor.

SANHENG Large Body Normally Close Refrigeration Solenoid Valve manufacturers in China. In the refrigeration system, the solenoid valve is the key component to control the fluid on and off. This kind of solenoid valve is widely used in refrigeration units, central air conditioning, refrigeration equipment and bus air conditioning and other refrigeration systems. In these applications, the stable performance of the solenoid valve is essential to ensure the proper operation of the system. The new refrigeration solenoid valve adopts high-quality materials and advanced production technology, has strong durability and reliability, and can maintain good performance during long-term use.

Plate Condenser/ Plate heat exchanger made in China. It’s a common type of heat transfer equipment, which consists of multi-layer plates and is widely used in industrial production. Its main function is to transfer heat from one fluid (such as water or steam) to another fluid (such as air or liquid) for heat exchange and transfer.

Shell And Tube Condenser made in China. Shell And Tube Condenser is a device used to convert vapors into liquids. As hot gases pass through a condenser, they come into contact with the surrounding cooling medium (such as water or air) and release heat to lower the temperature. This process is called condensation. Shell And Tube Condenser usually consists of a housing and an internal line. A cooling liquid flows in the line, which absorbs the heat emitted from the gas and allows the gas to condense into a liquid. The cooling liquid can be water, brine or other chemicals to suit different applications.

The Cold Storage Room Door Hinge is a device that allows the door to rotate open and close naturally and smoothly. The Cold Storage Room Door Hinge of: a hinge seat and a hinge body, one end of the hinge body is connected to the door frame through a mandrel, and the other end is connected to the door; the hinge body is divided into two sections, one section is connected to the mandrel, and the other section is connected to the door fan, and the two sections of the hinge body are connected to form an integrated whole through the connecting plate, and there is a hole for adjusting the gap between the door and the joints on the connecting plate. Since the hinge body is divided into two sections and connected as a whole by the connection plate, the door can be removed for repair by removing the connection plate. The door gap adjustment holes in the connecting plate include: a long hole for adjusting the gap between the upper and lower door gaps and a long hole for adjusting the gap between the left and right door gaps. The hinge can be adjusted not only up and down, but also left and right.